Why do you need RifleCX ceramic grease?

An indispensable tool

"Lithuania, my homeland! You are like health. How much you should be cherished is known only by those who have lost you..." – the words of our bard Adam Mickiewicz fit perfectly to describe this product.

A large proportion of shooters never unscrew the compensator (especially on AR-type rifles), pay no attention to the thread at the end of the barrel or its muzzle... Then the moment comes when we want to thoroughly clean the compensator, so we start unscrewing it and... a crack, seized solid. In extreme cases, the only option left is to heat it with a torch.

The solution

To avoid seizing and damage to the thread and barrel muzzle, it is sufficient to unscrew the compensator after each shooting session, remove dirt from the thread and barrel muzzle with a cleaning agent (in this case we recommend using a brass brush), and then apply a ceramic grease to shoot afterwards without any stress.

A similar procedure can be applied to the stock of rifles – securing the stock with grease before shooting makes removal easier.

Properties of RifleCX ceramic lubricant

• Resistant to extremely high temperatures
• Whether you fire X magazines in training or you are the lucky owner of a "full-auto" – it always protects against water and seizing
• Adheres perfectly to surfaces and prevents seizing

Instructions for use

Apply the lubricant to the surface after cleaning the threads.

If you need a lubricant for moving parts, be sure to use the Teflon grease! Ceramic grease is intended for use on threads!

Technical properties

• High temperature resistant – up to 1400°C
• High plasticity of the grease at low temperatures, confirmed by test results from the Air Force Technology Institute
• Water-repellent, hydrophobic

Technical data

• Contents: 100 g